"I highly recommend Monteros Hardwood Flooring. They refinished the hardwood floors at our Redlands home and they look new and we are extremely happy with the results. Javier communicated regularly throughout the project. His team is professional, efficient and very prompt and the work was finished in a timely manner. We are very pleased with the results and we highly recommend them."
Hardwood Floor Refinishing in Riverside
Bring tired hardwood back to life with sand, stain, and seal - most homes done in 3 – 5 days.
Refinishing in Riverside, CA
Refinishing in Riverside is some of our favorite work - Wide era spread: 1900s – 1940s bungalows with original oak waiting to be revealed, 1960s ranches with raised foundations, and 2000s slab-on-grade developments in Orangecrest and Mission Grove, and there's almost always solid wood worth saving.
Our shop in San Bernardino is about 28 minutes from Riverside. Close enough for fast service calls, established enough that we know the neighborhoods, the building stock, and the local building department. We've been refinishing hardwood and luxury flooring across Riverside County for over 20 years.
What You Get
- Dust-contained sanding system - far less mess than open sanding
- Custom stain matching, including grey, ebony, and natural tones
- Water-based polyurethane (low VOC) or oil-based options
- Screen-and-recoat available for floors that just need a refresh
- Most floors can be refinished 4 – 7 times over their lifetime
Coverage Across Riverside
We serve homeowners across Riverside, including Wood Streets, Mission Grove, Canyon Crest, Orangecrest, and the surrounding neighborhoods.
Zip codes: 92501, 92503, 92504, 92505, 92506, 92507, 92508, 92509
About Riverside Homes
Riverside has one of the most varied housing stocks in the region - historic Wood Streets craftsman bungalows from the 1910s, mid-century ranches in Magnolia Center, and 2000s tract homes in Orangecrest. We adjust species and approach for each.
Housing profile: Wide era spread: 1900s – 1940s bungalows with original oak waiting to be revealed, 1960s ranches with raised foundations, and 2000s slab-on-grade developments in Orangecrest and Mission Grove.
Our Refinishing Process in Riverside
Same predictable steps on every job, from first measurement to final walk-through.
- 01
Floor inspection
We check thickness, water damage, board cupping, and any boards that need replacing first.
- 02
Coarse sanding
Old finish, scratches, and pet stains come off down to bare wood.
- 03
Fine sanding and edging
Hand-edged corners, screen-sanded for a glass-smooth surface.
- 04
Stain application
Custom-matched stain, applied evenly, wiped to depth you approve from a sample board.
- 05
Sealer + 2-3 coats finish
Cure time between coats. Walk-on after 24h, furniture back after 5 – 7 days.
Refinishing FAQ for Riverside Homeowners
- Yes - Riverside is one of our core service cities. We work in Wood Streets, Mission Grove, and the rest of the city weekly. Our shop is about 28 minutes away in San Bernardino, so response times are fast.
- Riverside pricing aligns with our standard Inland Empire range: $3 – $7 per square foot installed. Final price depends on square footage, floor condition, and stain choice. Free in-home estimate gives you exact numbers.
- 3 – 5 days, including cure time. Riverside permitting is generally fast - most jobs don't require a permit; the few that do (significant subfloor work) we handle for you.
- If you have at least 1/8 inch of wood above the tongue and groove, you can refinish. We measure during the free estimate and tell you straight. Engineered floors may have a thinner wear layer - ask before assuming.
- Far less than the old days. We use a dust-contained sanding system that captures most particulate at the source. Expect light residual dust on hard surfaces - we wipe down at the end.
- Sock feet after 24 hours. Shoes after 48. Furniture back after 5 days. Area rugs after 14 days - the finish needs that long to fully cure.
- We always do a 2 ft x 2 ft test patch in your home with your wood and your light before sanding the whole floor. You sign off on the color before we commit.
- Solid 3/4-inch hardwood typically handles 4 – 7 full refinishes over its lifetime. Screen-and-recoat (light refresh) can be done many more times in between.
Do you serve Riverside for refinishing? +
What's typical pricing for refinishing in Riverside? +
How long will a refinishing project take in Riverside? +
Can my floors be refinished or do I need to replace them? +
How dusty is the process? +
How soon can I walk on my floors? +
Will the new color exactly match my sample? +
How often can hardwood be refinished? +
Other Services We Offer in Riverside
Looking for a different flooring service in Riverside? Browse all options:
Free refinishing estimate in Riverside
In-home consultation, samples on-site, written quote within days. 20+ years of Inland Empire craftsmanship.